How to Specify a Shell-and-Tube Heat Exchanger | Keller & Associates
Keller & Associates, Inc.  Industrial Heat Transfer & Process Equipment

Shell-and-Tube Heat Exchangers · Specification Guide

How to Specify a Shell-and-Tube Heat Exchanger

A shell-and-tube exchanger is built to one duty, one pair of fluids, and one set of plant conditions. Get the specification right and you get an accurate price, a realistic delivery, and a unit that performs on day one. Miss key data and the quote stalls — or worse, the exchanger arrives and underperforms. Here is exactly what to put in your enquiry, and why each item matters.

Horizontal shell-and-tube heat exchanger in a fabrication bay
A shell-and-tube exchanger in fabrication. Every dimension on this unit — shell diameter, tube count, nozzle sizes — traces back to the data in the original specification.
Take this article:

The download is one clean .html file — headings, lists and tables, with the Yoast / SEO meta title and description tucked in as a comment at the very top where they won’t show on the page. Open it, copy everything, and paste it into a WordPress Text / Code editor or a Divi Code module. Upload the two photos to the Media Library separately and re-link them.

Why the specification decides the outcome

A shell-and-tube heat exchanger is not a catalogue item you pull off a shelf. Two exchangers with the same shell diameter can differ by a factor of three in heat transfer area, pressure drop, and price — depending on the fluids, temperatures, and pressures they were designed for.

That is why a supplier cannot price “a 12-inch exchanger, about six feet long” any more than a builder can price “a house, about this big.” The thermal design — done properly in rating software such as HTRI — needs real process data. Complete data gets you a firm, comparable quote. Incomplete data gets you a round of follow-up questions, a padded estimate to cover the unknowns, or a design with so much safety margin built in that you pay for steel you never needed.

The good news: specifying an exchanger is mostly a matter of answering ten questions well. None of them requires specialist software. Most of the answers are already sitting in your process flow diagram, your heat and material balance, or your plant historian.

The 10 things every specification needs

Send these ten items and a designer can rate your exchanger, select a construction type, and price it without coming back to you. Where you genuinely don’t have a number, say so — a stated unknown is far easier to work with than a silent one.

  1. Both fluids, clearly identified

    Name each fluid and say which stream is being heated and which is being cooled. “Cooling tower water” is workable; “process fluid” is not. If a stream is a mixture, give the composition. If it changes phase — condensing steam, boiling refrigerant, a vapourising process stream — say so, because a phase change completely changes the design. Flag anything corrosive, toxic, or fouling-prone now, not later.

  2. Flow rate for each stream

    Give the flow of both fluids in consistent units — lb/hr, gpm, or kg/h are all fine. If flow varies, give the normal, minimum, and maximum cases, and say which case the exchanger must guarantee. A unit sized only for average flow will disappoint you on the day the plant runs at full rate.

  3. Inlet and outlet temperatures — all four

    Each stream needs an inlet temperature and a required outlet temperature. Together with the flow rates, these four temperatures define the duty — the amount of heat, in BTU/hr, the exchanger has to move. If only three temperatures are known, the fourth can be calculated from the duty, but one side of the equation has to be pinned down.

  4. Operating pressure — and design pressure

    State the operating pressure of each side, and the design pressure and design temperature the vessel must be built to. These are not the same thing: design conditions set the wall thickness, flange ratings, and code calculations. Leaving them blank forces the designer to guess — and guesses, for safety, always go up, along with the price.

  5. Allowable pressure drop for each side

    How much pressure can each stream afford to lose passing through the exchanger? This single number drives tube size, baffle spacing, nozzle sizes, and pass arrangement. If your pump or compressor has limited head available, the allowable pressure drop is a hard limit, not a preference — say so clearly.

  6. Physical properties at operating conditions

    Density, viscosity, specific heat, and thermal conductivity for both fluids, at the actual operating temperatures. For common fluids — water, steam, standard oils — the designer’s software already has these. For proprietary process streams, only you have them, and viscosity in particular can change a design completely. Properties at the wrong temperature are worse than no properties at all.

  7. Fouling factors and how the unit will be cleaned

    Every exchanger fouls over time; the question is how fast, and how you plan to clean it. State the fouling allowance you want designed in (industry practice follows TEMA fouling resistances for common services), whether the bundle must be removable for cleaning, and whether you clean chemically or mechanically. A dirty service in a fixed-tubesheet unit that can’t be opened is a problem designed in from day one.

  8. Materials of construction

    Specify the materials for shell, tubes, tubesheets, and channel — or describe the corrosion environment well enough for the designer to recommend them. Carbon steel, stainless grades, copper alloys, titanium, and graphite all have their place, and the tube material is usually the first decision because the tubes are the thinnest, hardest-working part of the exchanger. See the materials section below.

  9. Size, orientation, and nozzle constraints

    Where is this unit going? Give the available plot space and maximum length, whether it mounts horizontally or vertically, any weight limit on the foundation or structure, and the nozzle sizes, ratings, and orientations your piping needs. A design that performs beautifully but is two feet too long for the pipe rack is not a design — it is a re-design waiting to happen.

  10. Codes, standards, and documentation required

    Name the design code (normally ASME Section VIII, Division 1), the TEMA class, and any company or industry specifications that apply — plus the paperwork you need with the unit: code stamping and registration, material test reports, drawings for approval, or a full data book. Documentation is cheap when it is specified up front and expensive when it is requested after fabrication. See the codes section below.

Don’t have all ten? Send it anyway.

Plant teams often hold off enquiring until every number is nailed down — and lose weeks. Send the duty, the fluids, and the temperatures you do have, and mark the rest “to be confirmed.” An experienced designer can rate the exchanger on stated assumptions, flag exactly which missing numbers could change the selection, and keep your project moving while you confirm them.

A filled-in example data sheet

This is what the core of a good enquiry looks like, for a simple oil cooler. Your fluids and numbers will differ — the shape of the information is the point.

Example: cooling lube oil with cooling tower water
ItemHot side (shell side)Cold side (tube side)
FluidLube oil, ISO VG 46Cooling tower water
Flow rate120 gpm150 gpm
Temperature in / out180 °F in, 130 °F out85 °F in, 105 °F out (approx.)
Operating pressure150 psig90 psig
Design pressure / temp.200 psig / 250 °F150 psig / 200 °F
Allowable pressure drop10 psi8 psi
Fouling / cleaningLight oil fouling; chemical cleanTreated tower water; bundle to be removable for mechanical cleaning
MaterialsCarbon steel shell; admiralty or stainless tubes to suit tower water — designer to recommend
Construction & codesHorizontal, TEMA Class C, ASME Section VIII Div. 1 stamped; maximum overall length 12 ft; nozzles 3 in. shell side, 4 in. tube side

Notice what this example does: it gives a complete thermal picture, it names the hard limits (pressure drop, maximum length, removable bundle), and it leaves the tube material open where the buyer genuinely wants the designer’s recommendation. That combination gets fast, comparable quotes.

Which fluid goes on which side?

You don’t have to decide this — the designer will — but if your plant has a preference, state it and say why. The usual rules of thumb are:

  • Tube side for the corrosive fluid, so only the tubes, tubesheet, and channel need the expensive alloy — not the whole shell.
  • Tube side for the dirty, fouling, or scaling fluid, because tube interiors are far easier to clean mechanically.
  • Tube side for the high-pressure fluid, because a small-diameter channel handles pressure more cheaply than a large shell.
  • Tube side for the smaller flow, and for fluids where precise temperature control matters.
  • Shell side for viscous fluids, which transfer heat better in the cross-flow pattern around the tubes.
  • Shell side for condensing vapours and for the larger flow in most liquid–liquid services.
Tube side in Tube side out Shell side in Shell side out Baffles (orange) Channel Rear head
Inside a shell-and-tube exchanger: one fluid flows through the tubes, the other flows around them inside the shell, guided by baffles that force it back and forth across the bundle to pick up or give off heat.

TEMA types, in plain English

Exchangers are described by a three-letter TEMA designation — front head, shell, and rear head, in that order. You will see these letters on drawings and quotes, and the rear-head letter is the one that most affects price and maintainability, because it decides how the exchanger handles thermal expansion and whether the bundle can be pulled for cleaning.

ConstructionCommon TEMA typesBest forWatch out for
Fixed tubesheet BEM, AEL, NEN Clean fluids, modest temperature difference between the two streams, lowest first cost The bundle cannot be removed, and shell-side mechanical cleaning is not possible. Large temperature differences stress the tube-to-tubesheet joints unless an expansion joint is fitted.
Floating head AES, AET Dirty services, large temperature differences, and any duty where the bundle must come out for cleaning or replacement Highest cost of the common types, and a larger shell for the same tube count — but it is the workhorse of refinery and chemical plant service for a reason.
U-tube AEU, BEU High temperatures and pressures, and thermal expansion problems — each tube is free to grow independently The bundle is removable, but the inside of the U-bends is hard to clean mechanically, and a failed tube in the bundle is harder to replace.
Kettle reboiler AKT, BKT Boiling a liquid and drawing off vapour, typically at the base of a distillation column Needs level control and vapour disengaging space — it is a specialist selection, so describe the boiling duty in full.

Also name the TEMA class: Class R for severe refinery and petroleum service, Class C for general commercial service, and Class B for chemical process service. The class sets mechanical details such as corrosion allowance, tube pitch, and minimum thicknesses — which is why the same duty can be quoted at noticeably different weights and prices against different classes.

Exposed heat exchanger tube bundle resting on steel cradles
The tube bundle is where the heat transfer happens — and the part that fouls, corrodes, and gets cleaned. Whether it can be pulled from the shell is one of the most important decisions in the specification.

Choosing materials

Material selection is a corrosion decision first and a cost decision second. The cheapest material that survives the service is the right one — and “survives” has to account for both fluids, cleaning chemicals, and start-up and upset conditions, not just normal operation.

MaterialTypically chosen whenNotes
Carbon steelServices are non-corrosive — oils, hydrocarbons, steam condensateLowest cost and easy to fabricate. Needs a corrosion allowance where any attack is expected.
Stainless steel (304 / 316)Corrosive process streams, food and pharmaceutical duties, treated waters316’s molybdenum content improves resistance to chloride pitting over 304 — relevant with cooling tower and coastal waters.
Copper alloys (admiralty brass, 90/10 Cu-Ni)Water services, especially seawater and brackish cooling water (Cu-Ni)Excellent thermal conductivity. Check compatibility with ammonia and sulphides, which attack copper alloys.
TitaniumSeawater, chlorides, and oxidising corrosive services defeat stainless steelsHigh first cost, very long life in the services that suit it. Often the cheapest option over the life of the plant.
Graphite and silicon carbideHighly corrosive chemicals such as hydrochloric acid, where metals fail quicklyGraphite exchangers — including the SGL Carbon lines Keller represents — are the standard answer for corrosive chemical and HCl service, but they need handling and pressure limits respected.
High alloys (Duplex, Hastelloy, Inconel)Hot, aggressive, or mixed-acid services exceed stainless capabilitySpecify from corrosion data or testing, not from habit — the cost step is significant and sometimes avoidable with a different construction.

If you are unsure, describe the fluids, concentrations, temperatures, and any history — “the last bundle lasted four years and failed by pitting under deposits” is exactly the kind of information that leads to a better selection than guessing a grade.

Codes, standards and testing

  • ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 — the design and fabrication code for the pressure boundary on most U.S. installations. Say whether you require the ASME U stamp and National Board registration.
  • TEMA standards — the Tubular Exchanger Manufacturers Association standards covering mechanical design, tolerances, and the class system described above.
  • API 660 — commonly specified on top of TEMA Class R for refinery shell-and-tube service.
  • HTRI rating — Keller rates thermal designs in HTRI software, the industry-standard tool, so the performance prediction behind your quote is checkable rather than a rule of thumb.
  • Testing and inspection — hydrostatic testing is standard. If you need pneumatic testing, radiography beyond code minimums, positive material identification (PMI), or third-party inspection hold points, specify them in the enquiry.

The three trade-offs behind every design

Every exchanger design is a balance of three things. Knowing the balance exists helps you read quotes intelligently — and explains why the lowest-price unit is not always the cheapest to own.

1. Area versus pressure drop

Pushing fluid faster improves heat transfer and shrinks the exchanger, but pressure drop rises roughly with the square of velocity, and pumping costs money every hour the plant runs. Your allowable pressure drop (item 5) is where this trade-off gets settled.

2. Fouling margin versus overdesign

Designing in fouling resistance means extra area, which costs money up front and — because velocities fall — can sometimes make fouling worse. The right margin comes from honest information about your fluid and your cleaning interval (item 7), not from doubling the area “to be safe.”

3. First cost versus cleanability

A fixed-tubesheet unit is cheaper to buy than a floating-head unit of the same duty. If your service fouls and the bundle has to be cleaned twice a year, the floating head pays for itself quickly in downtime alone. Match the construction to the cleaning reality.

Specifying a retrofit or replacement

Replacing or re-rating an existing exchanger needs everything above, plus what you know about the unit already in the line:

  • The existing manufacturer, model, serial number, and TEMA type — all on the nameplate. A phone photo of the nameplate is genuinely useful.
  • The original data sheet or general arrangement drawing, if you have them.
  • How the existing unit performs now: actual flows and all four temperatures, measured at the same time, plus the pressure drop if you have gauges.
  • Why it is being replaced — fouled, corroded, leaking, or simply undersized for a duty that has grown.
  • The fixed constraints: nozzle locations and sizes that must match existing piping, and the maximum footprint the replacement can occupy.
  • Whether you want a like-for-like replacement, a re-rate for a new duty, or a re-design that fixes the original unit’s weaknesses.

Keller provides thermal design for retrofits as well as new installations, so an existing exchanger can often be assessed for a different duty before you commit to replacing it.

Mistakes that slow down quotes

These are the gaps and errors that most often send an enquiry back with questions instead of forward with a price:

  • Missing outlet temperatures. Flow rates alone don’t define a duty. Without temperatures, there is nothing to design to.
  • No allowable pressure drop. The designer has to assume one — and the assumption will either inflate the unit or produce a design your pump can’t push through.
  • Properties at the wrong conditions. Viscosity quoted at room temperature for a fluid that runs at 300 °F can change the tube count by half.
  • Mixed-up units. gpm versus lb/hr, psig versus psia, °F versus °C. State the units on every number, every time.
  • Operating pressure given, design pressure forgotten. Fabrication cannot be priced properly without design conditions.
  • No mention of fouling or cleaning. This decides the construction type. Leaving it out invites the cheapest construction — which may be the wrong one for your service.
  • Plot space discovered late. Mentioning the 10-foot length limit after the 14-foot design is quoted wastes everyone’s week, including yours.
  • “Same as the last one” — with a different duty. If flows or temperatures have changed since the last purchase, the old drawing is background, not a specification.

Copy-and-send RFQ checklist

Copy this checklist into your next request for quotation and fill in what you can. Even a half-completed version, honestly marked, will get you a faster and firmer quote than a paragraph of prose.

Shell-and-tube exchanger — RFQ checklist

  • Service / tag number and what the exchanger does in the process
  • Hot fluid name and composition — and cold fluid name and composition
  • Phase of each stream: liquid, vapour, or changing phase
  • Flow rate of each stream (with units), plus min / normal / max if it varies
  • All four temperatures: hot in, hot out, cold in, cold out
  • Operating pressure of each side
  • Design pressure and design temperature of each side
  • Allowable pressure drop for each side
  • Physical properties at operating temperature (or ask the designer to use software values for standard fluids)
  • Fouling factors required, cleaning method, and whether the bundle must be removable
  • Preferred shell-side / tube-side arrangement, if any, and why
  • Materials of construction — or a description of the corrosion environment
  • TEMA type and class if specified; ASME VIII Div. 1 stamp required? (yes / no)
  • Orientation (horizontal / vertical), maximum length and footprint, weight limits
  • Nozzle sizes, ratings, and any fixed piping orientations
  • Documentation required: approval drawings, material reports, data book
  • For a replacement: nameplate photo, existing drawings, and current measured performance
  • Delivery site and required delivery date

What happens after you send it

With a complete specification, the process is straightforward. Keller rates the duty in HTRI, selects a TEMA construction and materials that suit the service and the cleaning reality, and matches the design to the manufacturers we represent — including large-diameter and custom alloy fabrication through Gaston Fabrication, and graphite and silicon carbide exchangers through SGL Carbon for corrosive duties where metal is the wrong answer. You receive a priced proposal with the thermal design behind it, so your team can check performance, pressure drop, and construction against your specification line by line.

If your specification has gaps, you will get specific questions back — not a padded price. That is deliberate: a quote built on stated assumptions you can review is worth more than a fast number built on guesses you can’t.

Discuss your thermal design project

Keller & Associates helps engineering firms and plant teams source heat exchangers, process heaters and thermal fluid systems, and provides shell-and-tube thermal design for new installations and retrofits. Send your data sheet — complete or not — and we’ll take it from there.

Brian Keller Call 251-751-2006 info@keller-associates.com Fax (251) 865-2003